How to Properly Use a Small Water Well Drilling Rig in 2025
In 2025, small water well Drilling Rigs are a lifesaver for things like farm irrigation and home water wells. They are light, efficient, and affordable. But to get them to perform their best and keep everyone safe, you've got to use them right. As an operator, mastering these key points will help you work more professionally and safely.
Before You Start: The Pre-Job Check
Check Your Fluids: Make sure your engine oil, hydraulic fluid, gear oil, and coolant are all at the right levels. The fluids are the rig's lifeblood, and keeping them clean and full ensures everything runs smoothly.
Check for Tightness: Go over all the bolts and nuts. Pay special attention to key areas like the mast, power head, and chassis connections. If anything is loose, tighten it up right away.
Inspect Your Tools: Check the drill rod threads for wear and make sure the drill bit blades aren't damaged. A worn-out bit not only slows you down but can also cause damage to the main spindle.
Look at the Hoses: Check all the hydraulic, water, and air hoses for any cracks, signs of age, or leaks.
While You are Working: Follow the Rules
Keep It Smooth: Whether you are lifting or lowering the drill tools, do it steadily. Especially when you are pulling the drill up—don't yank it. Jerky movements put a huge strain on the winch, power head, and mast.
Control Your Settings: Adjust the drilling pressure and rotation speed based on the ground you are in. For soft soil, you can increase the speed and ease up on the pressure. For hard rock, you'll need to slow down and push harder, maybe using an impactor or air.
Clean the Hole Regularly: While you are drilling, pull the drill out as needed to clear out rock cuttings from the bottom of the hole. This helps your drill bit stay efficient and prevents the drill from getting stuck.
Never Overload It: A small rig has a max drilling depth and weight capacity. Don't go beyond its limits, like using a drill rod that's too heavy or trying to drill deeper than it's designed to go.
After the Job's Done: Proper Maintenance
Clean Up: Wipe down the rig to get rid of any mud and oil, especially on the drill rod threads and power head gears. Keeping it clean prevents dirt from wearing down parts.
Lube It Up: Apply grease to all the lubrication points on the rig. Doing this at the end of the day helps prevent rust and extends the life of the parts.
Park It Right: Store the rig on a flat, dry spot. If you are going to put it away for a while, it's a good idea to remove the drill rod and bit and apply a rust-preventative coating.
Do Regular Maintenance: Stick to the manual's schedule for changing the engine oil, hydraulic fluid, filters, and other consumables.
Conclusion:
Think of your small drilling rig as a great partner. If you take good care of it, it will serve you for a long time and a lot more reliably. Using it correctly and maintaining it carefully not only keeps you safe on the job but also significantly extends the rig's lifespan, adding more value to your work.
Contact us
To learn more about Chinese water well drill rigs, click the link and contact us.
Martin